TC 3-22.23 — M18a1 Claymore Munition
TC 3-22.23 governs the M18A1 claymore munition, including its firing systems, operation, safety, training, and employment.
- Publication number: TC 3-22.23
- Title: M18A1 CLAYMORE MUNITION
- Date: 11/15/2013
- Proponent: T2COM
- Status: ACTIVE
View TC 3-22.23 on armypubs.army.mil
It covers nonelectrical and electrical firing systems, components, standard operation, unusual conditions, training, and employment considerations. It requires attention to friendly troop safety, firing-position preparation, circuit testing, and handling precautions.
Topics covered
- M18A1 claymore munition
- Nonelectrical firing systems
- Electrical firing systems
- Firing positions
- Circuit testing
- Misfire procedures
- Controlled frontal coverage
Questions and answers
What firing systems can initiate the M18A1 claymore munition?
When using this firing system, an operator can use two methods to initiate detonation: Shock tube assembly with pull initiator. Time fuze attached to detonating cord with pull initiator. (paragraph 1-5)
What is the danger area in front of the M18A1 claymore munition?
The danger area consists of a 180-degree fan with a radius of 250 meters centered in the direction of aim (Figure 1-2). (paragraph 1-8)
What is the minimum safe operating distance from the munition?
THE MINIMUM SAFE OPERATING DISTANCE FROM THE MUNITION IS 16 METERS. (paragraph 1-8)
What protective equipment is required when handling blasting caps?
ALL OPERATORS MUST WEAR LEATHER-PALMED GLOVES WHEN HANDLING BLASTING CAPS. (paragraph 2-11)
What does the M40 test set test?
The M40 test set tests the M57 firing device and the M4 electrical blasting cap assembly. (paragraph 3-13)