STP 44-14J14-SM-TG governs MOS 14J training for C4I tactical operations center enhanced operators and maintainers.
View STP 44-14J14-SM-TG on armypubs.army.mil
It contains training tasks across communications, AMDPCS, SINCGARS, MSE, generators, vehicle operations, GPS, emplacement, and other subject areas. The tasks specify performance standards, measures, required equipment, and evaluation guidance using GO or NO-GO results.
1. Checked radio set for loose or broken knobs or switches. 2. Checked radio set jacks for bent or broken pins. 3. Checked radio set pressure port for obstructions or damage to rain shield. 4. Checked selectable power adapter for bent or broken pins on connectors. 5. Checked power, RF, and URO extension cables for cracked insulation, bent or distorted connectors, or damaged pins. 6. Checked memory battery (KAB-Keep Alive Battery). 7. Performed self-test to identify any faults. 8. Performed corrective actions for any operator correctable faults. (paragraph 8)
Sends and receives FDL messages via the control net and the communications net, per SOP and TM 11-5825-283-10 without causing injury to self or other personnel, with no damage to the equipment, and within the time prescribed by local command directives. (paragraph 5)
Powers up, transmits and receives voice communications, sends and receives messages without causing injury to self or other personnel, with no damage to the equipment, and within the time prescribed by local command directives per TM 11-5820-1130-12&P. (paragraph 3)
Score the soldier NO-GO if any step is failed. If the soldier fails any step, show what was done wrong and how to do it correctly. (paragraph 8)